Outsider III
The Out-Sider III® is easy to operate. Just turn the key and move the control lever to the position marked ARROW UP or ARROW DOWN. The unit automatically lifts and lowers the power chair. The chair is then securely held with a unique 4 point color coded strap system.
The Out-Sider III can raise and store power chairs weighing up to 300 lbs., using a Class III hitch with a 2" receiver. The
Out-Sider III system is superior to any other rear exterior lift. The unit is powder coated and assembled with stainless steel fasteners for long life. In addition to these features, a special weight sensing device determines if there is a power chair on the platform and will fold the lift into the storage position when empty.
Bruno's Out-Sider III features an ON-OFF key for greater security, and an automatic emergency safety latch prevents the platform from lowering. As a result, the
Out-Sider III gives you an easy to use, secure way to transport your power chair.
The Out-Sider III is powered by your vehicle's battery and is delivered fully equipped, including a lighted license plate holder, reflectors and a center brake light for added safety.
| Outside III
ASL-210 |
$1995.00 |
|
|
Big Lifter VSL-570
The Bruno Big-Lifter is electrically powered from the vehicle's battery.
Simply press a button on the controller and the Big-Lifter raises and lowers your fully assembled power chair weighing up to 300 pounds, allowing you to manually swing it in or out of the vehicle. Minimum strength is required.
The Bruno Big-Lifter manual swing has a low-resistance design that is easy to swing in and out, and comes complete with a lifting device designed specifically for the power chair.
The Bruno Big-Lifter is a fully adjustable lift that can be installed in just a few hours and requires no structural modification to the vehicle.
The Bruno Big-Lifter securely stores your scooter or power chair in the rear of most vans, minivans and sport utility vehicles: positioned behind the rear seat.
| Big Lifter
VSL-570 |
$1895.00 |
|
|
Curb-Sider Super XL
(VSL-670)
The New Curb-Sider Super XL lift is electronically powered from the vehicle's battery. Simply press a button on the hand-held controller and the
Curb-Sider Super XL raises and lowers your power chair.
Bruno's New Curb-Sider Super XL provides up to 180 degrees of powered rotation, which makes it easy to raise, lower and rotate a fully or partially assembled scooter or power chair on the curb at the side of your vehicle or directly behind it.
Bruno's Curb-Sider Super XL can end the struggle of manually trying to lift and store a scooter or power chair in your vehicle. The
Curb-Sider Super XL gives you the convenience you need to transport your power chair or scooter and the freedom to travel where you like.
The New Bruno Curb-Sider Super XL is designed to fit most types of full size vans, as well as minivans, sport utility vehicles, pickup truck and some station wagon applications.
The New Bruno Curb-Sider Super XL is equipped with a low profile lift arm with angle adjustment that allows the placement of larger power bases into smaller vehicle openings. The installation does not require any structural modifications to your vehicle. A custom base is included to provide a neater and easier
installation.
| Curb Sider
Super XL (VSL-670) |
$29,999.00 |
|
|
Curb-Sider Super XL3 VSL-690
The BRUNO VSL-690 CURB-SIDER SUPER XL3 is a lift for the rear of minivans, full-size vans, sport utility vehicles and station wagons.
The BRUNO VSL-690 CURB-SIDER SUPER XL3 3-axis control unit allows wider and larger scooters, power wheelchairs and equipment to fit into smaller vehicle openings like the new 2001 Daimler Chrysler minivan (with a power hatch).
This unique new lift is easy to operate with an ergonomic control pendent and can lift up to 400 lbs. A 200 lb. lifting capacity version for smaller vehicles such as the Daimler Chrysler PT Cruiser is available.
| Curb Sider
Super XL3 (VSL-690) |
$3495.00 |
|
|
|
