OUTRIDER VEHICLE LIFT

• Fully Powered - Makes lifting and storing your manual wheelchair, scooter or powerchair in the bed of your pickup truck virtually effortless (350 lb/159 kg lifting capacity)
• Outer Arm Design - A variety of outer arms are available to accommodate different length cabs so that you can drop your mobility device close to the front door (no need to walk to the back of the truck)
• No bed cover required - Out-Rider® lift is designed to withstand outdoor elements
• Available for passenger or driver side of pickup truck
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your truck - can be easily removed for resale
• Can reinstall in your next pickup
• Works with many different pickup trucks

POWER'S TOPPER POWER TILT CURB

• Fully Powered - The cap tilts up and down by pressing a button on the hand-held pendant
• Available for passenger or driver side of pickup truck
• Safe/Reliable - designed for years of worry-free operation
• No structural modifications to your pickup truck - can be removed for vehicle resale
• Can reinstall in your next truck
• Pre-assembled Ranch brand caps with Pow'r Topper framing are available through Bruno for a clean and precise installation
• Works with a variety of pickup trucks

CAB-SIDER VEHICLE LIFT 

• Fully Powered - Makes lifting and storing your folding manual wheelchair inside the cab of your pickup virtually effortless (90 lb/41 kg lifting capacity)
• Available for passenger or driver side of vehicle
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next pickup truck
• Available for many different pickup trucks
• Custom, vehicle-specific mounting kits are available for an extra clean and precise installation
 

BIG LIFTER VEHICLE LEFT 

• Power raise/lower - Makes lifting your scooter or powerchair virtually effortless (400 lbs/181 kg lifting capacity)
• Manual rotation - low resistance design glides smoothly
• Upgradeable to power rotate function - if your needs change down the road, this lift can be converted from manual to power rotate
• Docking device for your scooter or powerchair is included at no charge
• Offset Arm Design - Allows lifting/lowering behind, at the rear corner of, or on the side of the vehicle (near the rear wheel)
• Fold-down Lift Head allows partial third row seating access (where applicable) or cargo space and improved driver visibility when mobility device is not present (requires optional quick release pins)
• Available for passenger or driver side of vehicle
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next vehicle
• Works with minivans, SUVs, CUVs and full-size vans
 

WHEELCHAIR LIFT VEHICLE LIFT 

• Power Raise/Lower and Manual Rotate Operation - Makes lifting and storing your manual folding wheelchair or travel scooter inside your vehicle virtually effortless (150 lb/68 kg lifting capacity)
• Lift folds down when not in use
• Easy, one button operation
• Docking device for your mobility device is included at no charge
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next vehicle
• Works with minivans, SUVs, CUVs, full-size vans and sedans
 

OUTSIDE MICRO EXTENDER LIFT

• The lightest-weight exterior vehicle lift designed to handle today’s popular travel scooters!
• Lowest-profile design minimizes rear vision obstruction.
• Industry-leading 145 lb./65.9 kg. lifting capacity.
• The gas-spring assist provides easy “fold/unfold” of the lift platform. The safety latch prevents unintentional lowering of the lift platform.
• Exclusive “lift mast angle adjustment” allows the installer to nest the Out-Sider Micro tight against the rear of the vehicle.
• Road and laboratory tested by a certified testing facility.
• Bruno’s R3 Lift Belt/motor combination provides “whisper quiet” operation and maximum reliability and durability.
• Convenient control arm lets you operate the lift from a safe distance.
• An ultra-strength strap system is used to secure the scooter to the platform. It’s easy to use and can be operated with one hand!
 

SPACE SAVER VEHICLE LIFT

• The Bruno Space-Saver Vehicle Lift, Model ASL-325, is an exceptionally versatile take-apart lift designed to help store your scooter in vehicles with smaller trunks. The Space-Saver solves the problem of storing a scooter in smaller vehicles with limited trunk space.
• The Space-Saver is designed to fit closer to the interior trunk wall, providing a ‘tighter arc’ when manually swinging the scooter in/out of the trunk. This allows scooters to be stored in spaces that won’t work with more conventional lift designs, and the rotation of the lift arm makes it possible to raise/lower the scooter at the rear or side of the vehicle.
• The Space-Saver is fully adjustable for height and length and raises scooters weighing up to 200 lbs./91 kgs. The Space-Saver is lightweight and assembly/disassembly can be completed in three simple steps, quickly and easily.
• The Space-Saver can be stored anywhere - in the trunk or inside the vehicle itself. And when an additional tower base installation kit is ordered, the Space-Saver can be used in more than one vehicle.
 

OFFSET SPACE SAVER VEHICLE LIFT

• Gives you the flexibility to load a partially-assembled scooter into the trunk of today’s smaller cars or those cars with ‘sloped-in’ trunk designs. This Lift features an offset outer arm allowing you to more easily position your scooter inside narrow trunk openings.
• Ideal for vehicles with trunks that previously were considered too small for lift installations. Now you don’t have to go without the benefit of a lift any longer and there’s no need to consider the costly purchase of a different type of car.
• Designed with a low-profile, outer arm to make storing your scooter even easier. All controls are located conveniently on top of the lift arm. Just press a button and eliminate the struggle of raising and lowering your scooter!
• Can be stored anywhere, in the trunk or inside the vehicle. It disassembles quickly and easily, requiring only three steps. When an additional tower base assembly is ordered, it can even be used in more than one vehicle.
• Raises and stores many types of three- or four-wheel scooters weighing up to 200 lb.
 

SCOOTER LIFT VEHICLE LIFT

• Power Raise/Lower and Manual Rotate Operation - Makes lifting and storing your scooter inside your vehicle virtually effortless (200 lb/90 kg lifting capacity)
• Lift folds down when not in use
• Easy, one button operation
• Docking device for your mobility device is included at no charge
• Safe/Reliable - lifecycle and strength tested beyond industry standards
• No structural modifications to your vehicle - can be easily removed for vehicle resale
• Can reinstall in your next vehicle
• Works with minivans, SUVs, CUVs, full-size vans and sedans
 

OFFSET FOLD AWAY VEHICLE LIFT

• Eliminates the struggle of taking apart your trunk lift. This lift fits most sedans, hatchbacks and station wagons and is ideal for smaller openings where space may be limited. It simply rotates and folds down into your trunk or hatch area.
• Designed to be installed on either the driver or passenger side, giving you the flexibility to load a partially-assembled scooter from the driver or passenger side as well as behind the vehicle bumper.
• Simply press a button on the pendant control and the Offset Fold-Away raises and lowers your mobility device.
• The effort needed to lift the mast is a mere 2-3 pounds and it features a dual-spring assist.
• It incorporates a low-resistance, pivot design making operation almost effortless.
• Color-keyed, hand grips make user operation simple and easy to follow.
• Features Bruno’s industry-leading, adjustable, low-profile outer arm and lifts up to 200 lbs./91 kg.
• Optional 250 lbs./113 kg. upgrade lifting capacity available.
 

SCOOTER LIFT II

• Ideal for raising and storing a fully-assembled scooter or wheelchair into the driver or passenger (sliding) side door of minivans, as well as the passenger side door of full-size vans.
• Requires very little arm strength, balance or effort to use. It’s so compact that even when you use it in a minivan, there is still enough room for three passengers to sit comfortably in the rear seat. With the scooter removed, or when traveling without the scooter, entry and exit is easy since the door opening remains unobstructed.
• Features an optional installation assembly that eliminates the need to drill holes in the floor of the vehicle. This allows easier removal when it comes time to transfer the lift in and out of a minivan.
• Can be used for either three- or four-wheel scooters as well as manual-folding or power wheelchairs weighing up to 200 lbs./91k. The hand-held controller makes this lift simple and easy to use.
• Powered by your vehicle’s battery and all lift operations are automatic - just help guide the scooter or wheelchair into place.
 

BACK SAVER VEHICLE LIFT

• Simple to operate and does not require any manual lifting. Just fold up the wheelchair and roll it onto the platform. Turn the key to the ON position and depress the rocker switch to the UP position. Unloading the wheelchair is just as simple and trouble-free.
• Rated to handle most folding wheelchairs, with 22'' or larger rear wheels, and features a 100 lb./45 kg. weight capacity.
• Fits a standard Class I hitch tongue or a Class II/III if an adapter is used. It also features a strong, tubular frame for structural rigidity and maximum durability.
• Features a self-locking, hold-tite bar that’s designed to grip the chair firmly during transport, without marring its finish.
• Meets state and federal D.O.T. regulations for license plate illumination and visibility. It also includes an extra brake light for security and peace of mind.